T-Liner Full Length - Ambient Cure

$170,018.00

The T-Liner ASTM F2561 compliant system extends up the lateral pipe to the cleanout and provides a full-circle; one-piece connection with Insignia® hydrophilic compression gaskets and engineered tapered ends.

T-Liner Ambient System

Air Compressor 70 CFM

Portable Boss Bullett II Rotary Screw Air Compressor, 70 cfm rated delivery, 20hp Honda 4-cycle engine, 100 psig operating pressure rating, single stage oil flooded rotary screw, 80-115 psig operating pressure range, oil to air cooling system, 43″L x 31″ W x 35″ H. Weight 410 lbs. Equipped with 2 – 25 ft. 3/4″ air hoses

Portable Ambient Air Reel System

  • Hose Reel with Rotary Fluid Passage with high torque gear reduction pneumatic auto level wind. Fixed with 500′ of high tensile 1/2″ x 1/2″ Dual Bonded Hose, all mounted on a pneumatic heavy duty cart.
  • Mounted TV Monitor
  • Portable 2000 watt Honda Generator
  • Coax Cable Reel
  • First Aid Kit/Fire Extinguisher/Eye Wash Kit mounted on the cart
  • Bottom Roller and Adjustable Top Roller

Winch Assembly

Electric, 115V with Remote Controller and 1000′ of 3/16 SST Cable

Rotational Device with Standalone Rewind Reel (Powered by Portable Generator)

For positioning and rotating launcher/hose assembly to align with lateral opening. Use with Ambient Air Reel. Includes locking elements with cans and bladders for 8″, 10″ and 12″ diameter.

Layflat Hose Assembly

  • 10′ Layflat Assembly for up to 5′ Liners
  • 25′ Layflat Assembly for up to 20′ Liners

T-Launcher for use with 5-Line Equipment

  • 8 inch Non-Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly
  • 10 inch Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly
  • 12 inch Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly

Layflat Hose Assembly Parts

  • Inversion Rope, 5/16″, Kevlar, Non-stretch, Single Braid White (To create a launcher set up order length of layflat hose x 2.5 plus 5 ft.- sold in 600′ sections)
  • Clamps – 2 per end needed

LMK CIPP T-Liner Wet Out Trailer – 28 ft.

Trailer is complete with a 48″ side door, full ramp rear door, and 7,000 lb. axles. Trailer is wired with 50 AMP breaker box, (5) fluorescent ceiling lights, 7′ 6″ ceiling and 3-way switches. Powered by an 7-KW super quiet external fill gasoline fired generator. (Generator is mounted inside the trailer in protective box)

  • Wet Out Starter Kit: Digital Thermometer Gun, Grommet Gun, Grommets, Quick Bands, Liner Wet Out Clamp, 2-Slug Rollers 1 with and 1 without Calibration Rings, digital pound scale, digital gram scale and T-Launcher stand.
  • Tool Box (mounted) with Universal Tool Kit
  • Hard wired vacuum pump 1.1 CFM @ 25″ of mercury (mounted on shelf)
  • Interior receptacles (Qty. 6)
  • Fold down aluminum wet out tables
  • Deep freezer (25 cubic feet)
  • Mixing drill, mixing paddle and holder with resin catch, digital scales for 5-Gallon Pails, Promoter and Catalyst
  • Storage shelf, marker board, markers and miscellaneous holders installed

Cleanout Equipment

  • Push Plug, Cleanout, downstream, Steam “B” Station, with ┬Ż inch flow thru, for 4″ – 6″ diameter pipes, hose and regulator assembly
  • Push Plug, Cleanout, upstream, non-flow thru, 3″ – 6″, with hose and regulator assembly

Training

  • License Fee per Territory (State), T-Liner
  • Training, Charge per Day, T-Liner, In-House at LMK’s Facility. Minimum 4 training days required. Trainees: Minimum 4, Maximum 8. LMK will provide all necessary training materials. Continental breakfast and lunch will also be provided. 2 Trainers
  • Training, Charge per Day, T-Liner, at Customer Location/Jobsite. Minimum 4 training days required. Trainees: minimum 4, maximum 8. Field Training must be scheduled to occur within 60 days from In-House Training. 2 Trainers
  • Travel Expenses for LMK Technicians/Trainers – Airfare (Economy or Coach) and/or Rental Car – will be added to order when travel is completed
  • (2) Travel Mobilization Time / per Trainer – Within Continental US

Want to get started?

T-Liner No Cleanout (TLNC) Camera and Positioning System

$93,730.00

Complete camera system with two cameras, 15″ stroke LMK positioner with 8″ packer element, air hose and 5-Line hydraulic hoses with ends, camera bracket and pins, complete 8″ flow thru T-launcher with male cam lock hose assembly, layflat hose and end cone assembly with steam back, laser guide and female cam lock positioner spacers (total of 8 of varying sizes) and cable strain relief with ends.

SYSTEM INCLUDES:

  • Camera/Reel System
  • Spare Camera
  • Modified Positioner with packer locking element, air hose and 5-Line hydraulic hoses with ends
  • Camera Bracket and pins (fits between T-Launcher and positioner)
  • 8″ Flow Thru T-Launcher with 18″ Layflat Hose Assembly with 4″ male camlock
  • Laser Guide
  • Layflat hose assembly for 3 ft. liners with 4″ female camlock, layflat hose, end cone, inversion rope and 20 ft of steam back hose
  • Enclosed day light color monitor
  • Positioner spacers Qty 4 – 1 inch, Qty 4 – 3/4 inch, Qty 4 – 1/2 inch
  • Cable strain relief with 1/8 inch coated ends
  • One quart of TPU Bladder Tab Adhesive
  • One bottle of Hydrophilic Glue (needed for installing O-Rings)
  • Extra pins for the camera bracket (order 2)
  • TLNC Positioner Hose Assembly – 1 set of 5-Line style positioner hoses for the rotation only (2 hoses bonded together with ends cut to length)