Shorty Schwalm System - Ambient Cure

$315,846.40

The ASTM F2561 Compliant Shorty™ Liner system extends up the lateral pipe and provides a full-circle; one-piece structural connection with ASTM F3240 Compliant Insignia® hydrophilic compression gasket sealing. Recommended length of lateral is 5 feet maximum.

Shorty Ambient System

Air Compressor 70 CFM

Portable Boss Bullet II Rotary Screw Air Compressor, 70 cfm rated delivery, 20hp Honda 4-cycle engine, 100 psig operating pressure rating, single stage oil flooded rotary screw, 80-115 psig operating pressure range, oil to air cooling system. 43″L X 31″W X 35″H Weight 410 lbs. Equipped with 2 – 25 ft. 3/4″ air hoses.

Portable Ambient Air Reel System

Hose Reel with Rotary Fluid Passage, with high torque gear reduction pneumatic auto level wind. Fixed with 500’ of high-tensile 1/2”x1/2″ Dual Bonded Hose, all mounted on a pneumatic heavy duty cart.

  • Mounted TV Monitor
  • Portable 2000 watt Honda Generator
  • Coax Cable Reel
  • First Aid Kit/Fire Extinguisher/Eye Wash Kit mounted on the cart
  • Bottom Roller and Adjustable Top Roller

Single Inversion Standard Rope Reel

Single Inversion Standard Rope Reel

Shorty T-Liner Layflat Launcher System for Use with Schwalm Robot

  • (2) 8 inch Shorty Layflat Launcher System (includes Schwalm Puck Set, Flow Thru T-Launcher 3.0, Camlocks and Layflat Hose, End Cone and Non-Stretch Kevlar Rope)
  • (2) 10 inch Shorty Layflat Launcher System (includes Schwalm Puck Set, Flow Thru T-Launcher 3.0, Camlocks and Layflat Hose, End Cone and Non-Stretch Kevlar Rope)
  • (2) 12 inch Shorty Layflat Launcher System (includes Schwalm Puck Set, Flow Thru T-Launcher 3.0, Camlocks and Layflat Hose, End Cone and Non-Stretch Kevlar Rope)

LMK CIPP T-Liner Wet Out Trailer – 28 ft.

  • Wet Out Starter Kit: Digital Thermometer Gun, Grommet Gun, Grommets, Quick Bands, Liner Wet Out Clamp, 2-Slug Rollers 1 with and 1 without Calibration Rings, digital pound scale and digital gram scale and T-Launcher stand
  • Tool Box (mounted) with Universal Tool Kit
  • Hard wired vacuum pump 1.1 CFM @ 25” of mercury (mounted on shelf)
  • Interior receptacles (Qty. 7)
  • Fold down aluminum wet out tables
  • Deep freezer (25 cubic feet)
  • Mixing drill, mixing paddle and holder with resin catch, digital scales for 5-Gallon Pails, Promoter and Catalyst
  • (2) Roof top air conditioners and heat strips (15 amp per unit)
  • PVC walls/ceiling, Insulated walls, ceiling, floor, grey rubber floor covering
  • LMK EZ Jack
  • LMK Ramp Door Bridge
  • Flush mount floor tie downs (Qty. 10)
  • Matching spare tire (mounted)
  • Fire extinguisher, first aid kit, PPE kit and eye wash station
  • Storage shelf, marker board, markers and miscellaneous holders installed

Schwalm Robotics and Accessories

  • Schwalm Robot – Focus Camera

    • The robot will be supplied standard with the following items:
    • Air motor type 2025-P Serial-Nr.
    • Air motor type 2560-P Serial-Nr.
    • Side weights, Digital Box, four sets of axle extension sets 12″-24″
    • Lifting hook, hydraulic oil, hydraulic oil including a filling device; several tools; operator’s manual and transportation box
    • Main Cable Repair Kit
    • A high-resolution, tilt, focus camera with integrated LED lighting
  • 19″ Video System

    • Digital Control Unit 19″ Video System (To build into vehicle)
    • Text generator and an electronical meter counter on screen (Includes OSD Card)
    • Has a proportional speed control. Power supply 120 V/60Hz and capacity approx. 1000 Watts. Weight 29 Kg.
  • Vehicle mounted remote control unit for control of forward/backwards movement of the robot.
  • Electrical cable drum RA200

    • Aluminum frame, emergency switch, digital footage counter on the front
    • Adjustable pulling strength of the cable, adjustable speed, automatic or manual control.
    • Includes a mounting bracket for the drum.
    • Power supply 115V 60 Hz or 220 Volts 50Hz.
    • Dimensions: Length 536mm; Width 350mm; Height 560mm. Weight 28kg
    • 660 Foot cable
  • Twin Hose Drum Reel

    • Top feed 500 feet of air and water hose. Includes camera cleaning unit.
  • (4) Carbide wheels Large Robot
  • (2) Piranha Milling Heads

    • Cone shaped special mill for cutting all kinds of materials except steel.
    • Diameter 2.75 inches, Height 3 inches, Number of segments 30
  • (2) Mushroom Shaped Milling Heads

    • Suitable for cutting all kinds of materials
    • Diameter 3.8 inches, small version with diamonds. Number of segments 12
  • (2) Wire Brush Heads

    • Small Cup Form- 2.5″
  • Air Motor Extension (4-inch) for 2560P Air Motor
  • Air Motor Extension (6-inch) for 2560P Air Motor
  • (2) Hydraulic Hose Short
  • (3) Bearings 618/8
  • (2) Bearings 61803 2Z
  • (1) Seal 17-26-6 BA
  • (2) Seals 45-58-7 BABSL
  • (4) Seals 30-47-7 BABSL
  • (1) Camera Cleaning Unit on Robot
  • (1) Air Hose for Cutting Motor
  • (1) Digital Motor for Tool Movement
  • (1) Digital Motor for Hydraulic and Arm Rotation
  • Wings for Air Mortor 2025 1000 W
  • V-Belt for 2060
  • Test Box for 1330/2060 Robot

Training

  • License Fee per Territory (State), T-Liner
  • (4) Training, Charge per Day, T-Liner, In-House at LMK’s Facility. Minimum 4 training days required. Trainees: Minimum 4, Maximum 8. LMK will provide all necessary training materials. Continental breakfast and lunch will also be provided. 2 Trainers
  • (4) Training, Charge per Day, T-Liner, at Customer Location/Jobsite. Minimum 4 training days required. Trainees: minimum 4, maximum 8. Field Training must be scheduled to occur within 60 days from In-House Training. 2 Trainers
  • (2) Travel Expenses for LMK Technicians/Trainers – Airfare (Economy or Coach) and/or Rental Car – will be added to order when travel is completed
  • (2) Travel Mobilization Time / per Trainer – Within Continental US

Want to get started?